Ricoh Scanner FAQ

Ricoh Scanner FAQ

There is no charge for scanning documents. However, you should not scan (or copy) copyrighted material. Select the scan function by pressing the Scanner button on the left of the display panel. Here are the simplified and advanced displays which you will see when you do this:

 simple display: 

 advanced display: 

Here is a quick rundown of the things most people might want to change

• Default Scan Settings:

 these are set to 200 dpi, grayscale and single sided.
 Click on the SCAN button in the upper left block to change these options.

• Setting the e-mail destination:

 You will probably want to change the e-mail destination. If this is the first time you have 
 done this, you should press the  display settings toggle in the lower right hand corner to get 
 the advanced display. Press the manual entry button (labeled 4) to enter your e-mail 
 address on the LCD keyboard which will appear.  Most people in the Math Dept have had their 
 e-mail addresses pre-entered, so you should see yours after you type the first few letters.

Once you have entered your e-mail address, you should be able to reach it by clicking on the key which corresponds to the first letter of your Math Dept e-mail address.

---

Step by Step Instructions

select scanner - button in column on left side

if machine seems to be asleep press On button repeatedly
if necessary deselect "Simplified Display" using button on lower right

choose Email -

e.g., press LMN and then square with Arnold Miller - 
rightmost square in first row

optional

change Scan Settings to 300dpi greyscale / button on left  - press OK
change Send File Type to multipage pdf   
 if you don't you may get 200dpi tif file
 singlepage mode means one-file per page

press Start button to scan - button on lower right

repeat press Start for more pages

press # = Enter button to finish - located above Start button

if you press Stop Button nothing will be emailed

it can take 3-4 minutes before you get email

WARNING: scanning to PDF works fine on the 5th 
floor printer. It may not work on some of the 
other floors -e.g. it does not work on the 6th floor.